|Message: question about how to score dose by using a mesh||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have read the guide for developers and some info about mesh on the web but I am not sure how the mesh works. The advise from the Geant4 experts will be very helpful to me.
I have launched gamma rays inside a water tank and there is a foil inside the tank. I have created a mesh in order to get the dose deposited in the foil. If the mesh overlap the foil, then Will the mesh calculate the dose absorbed by the foil? If so, that imply that the mesh has to know the density of the foil in order to calculate the dose inside the foil and I do not know how the mesh will get that info.
Many thanks in advance.