|Message: RE: RE: G4PSDoseDeposit and G4PSEnergyDeposit classes||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
> So the data dumped to my file like A=3Dxx.xxe-26 is in Gray (bacause unit > def is Gray) and to convert to any other I will use conversion > ratio.For Not really. To get the value in Gray, you should divide the value by "gray". your_value_in_gray =3D raw_value / gray; > -----Original Message----- > From: Nesin Menduev [mailto:firstname.lastname@example.org] > Sent: Friday, January 22, 2010 5:49 AM > To: biasing_scoring-g4hn > Subject: Re: RE: G4PSDoseDeposit and G4PSEnergyDeposit classes >=20 >=20 > *** Discussion title: Biasing and Scoring >=20 > Thanks for information given and support . What I understand is : from > SystemOfUnits.H >=20 > // Absorbed dose [L^2][T^-2] > // > static const double gray =3D joule/kilogram ; > static const double kilogray =3D 1.e+3*gray; >=20 > So the data dumped to my file like A=3Dxx.xxe-26 is in Gray (bacause unit > def is Gray) and to convert to any other I will use conversion > ratio.For > example to MeV/kg xx.xxe-26 must be multiplied by 1.64150 e+12 . If So , > why you mention to divide to gray again.May be I misunderstood. >=20 > Regards, >=20 > ------------------------------------------------------------- > Visit this GEANT4 at hypernews.slac.stanford.edu message (to reply or > unsubscribe) at: > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/biasing_scoring > /12/1/1.html