|Message: Histogram starting from -0.5 x-axis||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hello, geant4 users.
When I use hadr06 example to find energy deposit on neutron I put 0 as valMin in the macro file like so "/analysis/h1/set 1 100 0. 100 MeV #Edep"
However, when I extract the data from the created rootfile using this command: "TFile *f = TFile::Open("run2.root"); TH1D *h2 = (TH1D *)f->Get("1"); h2->Print("all"); > h2.txt"
I get value starting from -0.5 instead of 0.
If I change the valMin to 0.5, the x-axis starts from 0.0025.
I don't understand what is the correlation between the command and the result. Can someone help me understand?
Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2016/08/21/23.57-5094-h3.txt http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2016/08/21/23.57-37708-h2.txt
|Inline Depth:||Outline Depth:||Add message:|