|Message: Re: g4-root-HistoDraw||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
After inspecting the streamer infos of your file, the problem is similar to what is described in the 474 issue : http://hypernews.slac.stanford.edu/HyperNews/geant4/get/analysis/474.html
In the version of g4tools/tools/wroot/infos that produced the file, you have the "fScaleFactor" mistyping that should be "fScalefactor". Then this file had been produced with a version of g4tools in which this was not yet corrected. What is strange is that you say to use G4 10.1.p2, in which this is in principle corrected...
Then, in the version of G4 that you think to run, can you check if in the tools/wroot/infos file you have fScaleFactor or fScalefactor (it appears twice in this file).
|Inline Depth:||Outline Depth:||Add message:|