|Message: G4PSPassageTrackLength by secondary particles||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I'm building a simulation where a 3 GeV electron gun hits a Al2O3 Screen inside a tube and generates fluorescence. Then I calculate the Energy Deposit,Dose Deposit and Track Length on a CCD (SiO2 material) outside the tube. I'm calculating those parameters with the primitive scorers G4PSDoseDeposit, G4PSEnergyDeposit and G4PSPassageTrackLength.
Generating 1000 electron beams, I can get the Energy and Dose deposits, but the Track Length is always Zero. How can there be an Energy deposit and no length on the material? Do I have to activate some secondaries scores, because everything that hits the CCD is a secondary particle generated by the electron hit on the Al2O3 screen.
Another question, and maybe a very basic one, sorry for that: I can get the Energy and Dose for each beam. How would be the best way to calculate the sum of all and the maximum of each value?
Thank you very much.
|Inline Depth:||Outline Depth:||Add message:|