|Message: Re: histogram||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hello, I actually fixed it. You were right though, the problem was it wasn't writing and closing it. I set the verbose level and found out. Its ok now. Thank you for the reply
On Fri, 12 Jul 2013 13:20:38 GMT, Ivana Hrivnacova wrote:
> It is not clear from your description what gets wrong in your case. I > suggest first to check if you have these lines in your code > > analysisManager->Write(); > analysisManager->CloseFile(); > > and if they are really executed. If the above is correct, then you can > also set higher verbose level > > analysisManager->SetVerboseLevel(4); > > after creating the analysis manager and run with this level both the > example B4 and your application and check that you get the same kind of > messages. > > Best regards, >
|Inline Depth:||Outline Depth:||Add message:|