|Message: Re: A .root file||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Thu, 30 Sep 2010 17:13:23 GMT, Manuel Castro Avila wrote:
> I am compiling the extended/radioactivedecay/exrdm/ example. When I run > the example, a .root file is generated with the information about the > deposited energy into the detectors and others parameters. But I don't > know how to open this file. Does anyone know how to open this file to > see the results??
It's read using the high-energy physics analysis package, ROOT. If you wish, you can download and install ROOT from http://root.cern.ch/.
I'm surprised that you were able to have the .root file produced if you don't have ROOT installed on your system. Are you using a centrally managed installation of GEANT4, or one you built yourself? If the former, check with your system adminstrators to see where they've installed ROOT.
|Inline Depth:||Outline Depth:||Add message:|