|Message: Re: Untitled||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Yes Manish. I was able to implement it by using equation relating gamma energy and detector resolution. This equation has to be obtained experimentally using various gamma sources. Get standard deviation (sigma) from resolution and then generate gaussian for each number of counts corresponding to each value of energy. Finally, add the contributions to no. of counts corresponding to each energy to get the realistic spectrum. Good luck!
On Thu, 10 Jan 2019 08:42:43 GMT, Shams wrote:
> Hi Anil, > > Were you able to implement that? I have the same question. I am trying > to smear the energy deposited in NaI scintillator using FWHM. > > Thanks >
|Inline Depth:||Outline Depth:||Add message:|