|Message: Re: problems with getting histograms using JAIDA-3.2.4+AIDAJNI-3.2.3||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi again, on this subject, A01 and other examples should work without changes in any of the GNUmakefile (contrary to what I said before). A01 was explicitly tested with JAIDA and AIDAJNI. The others were not, but should work. JAIDA cannot write hbook files, or root files, so if those are missing, that makes sense. With JAIDA you can only write AIDA XML files. The change from root/hbook to aida xml is something you need to do in the code. Regards Mark On May 11, 2007, at 6:55 PM, Konstantinos Michael wrote: > *** Discussion title: Analysis > Email replies to PublicHyperNews@slac.stanford.edu must include: > In-Reply-To: <"/analysis/273/1"@geant4-hn.slac.stanford.edu> > Subject: ...change this to be about your reply. > > i have exactly the same problem. for the A01 example jaida works fine > but for the TestEm it doesent work!
|Inline Depth:||Outline Depth:||Add message:|