|Message: RE: JAIDA and AIDAJNI running error||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi, > Dear G4s: > it took us four days to figure out which implimentation of > JAIDA and AIDAJNI should be installed. we following the > instruction from QA 53. > But when I run A01 example. the error comes out. what is this > aproblem? > > ... > > Scintillator /HadCalorimeter Exception in thread "main" > java.lang.NoClassDefFoundError: hep/aida/IAnalysisFactory > IAnalysisFactory: Could not find class: > hep/aida/IAnalysisFactory FATAL ERROR in native method: > JIAnalysisFactory: Could not find class hep.aida.IAnalysisFactory > [jgao@dove1 A01]$ > ----------------------------------------------------------- > Does this mean our installation of JAIDA and AIDAJNI have problem? > I noticed somebody past the same information, but now responce. > thank you! This sounds like your environment is not set up properly. In the terminal where you are running Geant4 you need to make sure you have "sourced" aida-setup and aidajni-setup before running geant4. If you did this and it still doesn't work can you post the output from the command env issued right before you run geant4. Tony
|Inline Depth:||Outline Depth:||Add message:|