Message: Re: Trying to use any analysis tool Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None Re: Trying to use any analysis tool 

Keywords: analysis A01 AnEx01
Forum: Analysis
Re: Question Trying to use any analysis tool (michal)
Date: 09 Oct, 2006
From: Guy Barrand <Guy Barrand>

  Hello Michal

 How did you install OpenScientist-15 ? I strongly suspect that you 
attempt to install the SLC3-32bits binaries of the distrib on you SuSE. 
If so, then it is well known that despite SuSE and SLC3 are "Linux", 
this kind of operation may in fact be highly not portable (for exa due
to some g++ or libc incompatibilities).
 Worst, it seems that your machine is a 64 bits one, right ?
(Guessed from the path :
  /usr/lib64/gcc/x86_64-suse-linux/4.0.2/../../../../x86_64-suse-linux/bin/ld:
skipping incompatible)

 Then did you attempt to reconstruct OpenScientist-15 (and G4 in fact)
from source ?

 And the upper comment is probably valid also around you attempts
around AIDAJNI.

 And please, as usual, specify your platform, your compiler, etc...
I have guessed that you are on a SuSE 64 bits 
because it appeared somewhere in a path ; but what is your compiler 
version ? Your compiler seems to be a 4.0.2 from the same path
(my binaries had been built with a g++-3.2.3).

 Else, if you are on a x86 64 bits machine, there is a needed
patch around the Rio IO package. You should have in :
   Rio/Core/Platform.h
#if defined(__linux__) && defined(__x86_64__)
#   define RIO_BYTESWAP
#endif
 in order to byteswap correctly (see the archive of the OpenScientist
mailing list about that). But for the moment you problem is not 
this one.

 Again and again, there is nothing worst that someone coming 
and saying "it does not work !" without specifying more. 
(What can we do with that ?)

 In case of OpenScientist-15, you can contact my directly by email
to have a closer help loop. No problem. Passing by the hypernews 
is not the fastest way in case of "stuborn problems" (that may
be a true problem on my side in fact) and in case "you arrive to 
nothing". See my "Support" section for instructions in case you 
really arrive to nothing. 

  With my best regards.

    Guy Barrand
     
 

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

 Add Message Add Message
to: "Re: Trying to use any analysis tool"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]