Message: Problems with Open Scientific in SLC4 for hbook files Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

Question Problems with Open Scientific in SLC4 for hbook files 

Forum: Analysis
Date: 11 May, 2006
From: Sandro Fonseca (UERJ/Brazil) <sandro.fonseca@cern.ch>

Dear Guy Barrand,

My name is Sandro Fonseca and I am PhD braziliam student and I worked with Maria Grazia Pia in Radmon simulation (http://www.ge.infn.it/geant4/hep/radmon/). I installed Geant4.8.0_patch1 and OpenScientist version 15r0 with SLC4. I had some problems when I tried build Hbook files with my outputs but It did not work. Can you look error message below:

##################################################

Lib::DLL::DLL : can't load LabZebra library.
Lib::DLL::DLL : error  : libLabZebra.so: cannot open shared object file: No such file or directory
Lab::TreeFactory::loadTree : unable to add a DLL
Lab::TreeFactory::create : can't create "analysis_test.hbook".
 This is probably because the Lab Zebra driver had not been reconstructed on this installation.
 We try to proceed by creating the AIDA compressed xml file "analysis_test.aida"...
Lab::MemoryTuple::MemoryTuple : column int already exists
RadmonApplicationEventNumbering::OnBeginOfEvent: Begin of event 0.
Lab::MemoryTuple::fill(int) : column -1 not found.
Lab::MemoryTuple::fill(int) : column -1 not found.
Lab::MemoryTuple::fill(double) : column -1 not found.
Lab::MemoryTuple::fill(int) : column -1 not found.
Lab::MemoryTuple::fill(int) : column -1 not found.
##################################################

I do not understand this error message: "Lab::MemoryTuple::fill(int) : column -1 not found" ,because I tried use other output files with root files or Xml files and I showed same message. Therefore, I found you suggestion in Geant4 Forum and I was rebuilding LabZebra but It did not work. Can you look other error message below:

###########################################

[root@m36-dfnae v15r0]# cd Lab/v11r1/cmt/

[root@m36-dfnae cmt]# make Zebra

------> (Makefile.header) Rebuilding constituents.make

------> (constituents.make) Rebuilding setup.make Linux-i686.make

CMTCONFIG=Linux-i686

../Linux-i686/Lab_setup.make untouched

setup.make ok

------> (constituents.make) Rebuilding library links

------> (constituents.make) Building LabZebra.make

Library LabZebra

------> (constituents.make) Starting LabZebra

cd ../Linux-i686/; QUIET=; /usr/local/OpenScientist/v15r0/CMT/v1r18p20050501/mgr/cmt_make_shlib_common.sh extract "Linux-i686," LabZebra -L/cern/pro/lib -lmathlib -lpacklib -L/usr/local/lib -lshift -lnsl -lcrypt -ldl -lg2c -L/usr/local/OpenScientist/v15r0/Lab/v11r1/Linux-i686 -lLabCore -L/usr/local/OpenScientist/v15r0/Minuit/v1r140p3/Linux-i686 -losc_Minuit -L/usr/local/OpenScientist/v15r0/Midnight/v3r1p2/Linux-i686 -lMidnight -L/usr/local/OpenScientist/v15r0/HCL/v6r2/Linux-i686 -lHCL -L/usr/local/OpenScientist/v15r0/Lib/v7r3/Linux-i686 -lLibUtils -ldl -lm

g++ -shared -o libLabZebra.so "LabZebratemp_shlib/CHBOOK.o" "LabZebratemp_shlib/close.o" "LabZebratemp_shlib/hntvar2.o" "LabZebratemp_shlib/setpawc.o" "LabZebratemp_shlib/ZebraHistogram.o" "LabZebratemp_shlib/ZebraManager.o" "LabZebratemp_shlib/Zebra.o" "LabZebratemp_shlib/ZebraTree.o" "LabZebratemp_shlib/ZebraTuple.o" -L/cern/pro/lib -lmathlib -lpacklib -L/usr/local/lib -lshift -lnsl -lcrypt -ldl -lg2c -L/usr/local/OpenScientist/v15r0/Lab/v11r1/Linux-i686 -lLabCore -L/usr/local/OpenScientist/v15r0/Minuit/v1r140p3/Linux-i686 -losc_Minuit -L/usr/local/OpenScientist/v15r0/Midnight/v3r1p2/Linux-i686 -lMidnight -L/usr/local/OpenScientist/v15r0/HCL/v6r2/Linux-i686 -lHCL -L/usr/local/OpenScientist/v15r0/Lib/v7r3/Linux-i686 -lLibUtils -ldl -lm

/usr/bin/ld: cannot find -lshift

collect2: ld returned 1 exit status

make[3]: *** [../Linux-i686/libLabZebra.so] Error 1

make[2]: *** [LabZebra] Error 2

make[1]: *** [common_target] Error 2

make: *** [Zebra] Error 2

#################################

Please you, Would you help me with this problems?

Cheers, Sandro Fonseca

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

 Add Message Add Message
to: "Problems with Open Scientific in SLC4 for hbook files"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]