|Message: Re: Example TestEm5||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
User Steven Avery wrote:
>> In Example TestEm5 I have replaced the single absorber with a stack of >> absorbers 100x4x100 mm along the y-axis. The problem is that when I look >> at the histograms (for example) energy deposit all events are at zero. >> If I replace the stack with the single box it works fine. The question >> I'm asking is what do I need to do for analysis when I have a stack of >> absorbers. I assumed if it works for the single box it should work if >> the box is cut in layers. To create the stack I simply put a loop in >> physiAbsorber. All layers are the same material. >> >> Thanks
The collection of energy deposit is done in SteppingAction, under the protection : detector->GetAbsorber();
This function must be modified according to your new geometrical setup.
(Example of stack of absorbers can also be found in TestEm3)
|Inline Depth:||Outline Depth:||Add message:|