|Message: Point Source Measurement Simulation||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am quite new to Geant4 and this community and my question may have a very simple solution (at least I hope so). I am trying to model a gamma detector response to the point source measurement. I have modeled a source volume, detector, and now I am trying to have a uniformly distributed Am-241 source in the volume. What would be the easiest way to model a decay of Am-241? Can I specify the activity of my source? I am looking to simulate three gamma energy emissions, 13.9 keV, 26.4 keV, and 59.5 keV. Any help will be greatly appreciated!
Sincerely, George Tabatadze
|Inline Depth:||Outline Depth:||Add message:|