|Message: Re: differences in TIDs produced by gras and mulassis||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Dear Laurent, I think we resolved the problem (please see https://www.spenvis.oma.be/forum/viewtopic.php?f=16&t=288). Looks like the command setUnit is not respected by gras (the result was the same when I used rad or Mev). So in order to obtain a reasonable result, I used Mev and normalized the result by dividing it by (6.24e+10*mass [kg]) in order to get TID in rad. Thanks, Sveta On 2/25/14 12:44 AM, Laurent Desorgher wrote: > > *** Discussion title: Space Applications > > Dear Sveta, > > Could you explain more on the type of inputs you are using fort your > different runs? Number of primaries, definition of geometry? Any > normalisation? > > Best regards > > Laurent Desorgher > > On Wed, 12 Feb 2014 21:47:27 GMT, Svetlana Shasharina wrote: > >> I was using gras with mulassis type of geometry (hollow sphere with a >> solid sphere inside) and am getting huge differences in TID (the ratios >> are not constant, though): >> >> TID Al (gras) TID Cu (gras) 1.07E+15 1.01E+13 >> >> TID Al (mulassis) TID Cu (mulassis) 5.70E+06 1.40E+05 >> >> The inputs were generated using spenvis portal but I also ran gras 2.1 >> locally and confirmed that the resulting TIDs are huge. >> >> Anybody can help me to interpret these differences? >> >> Thanks, Sveta >> > > ------------------------------------------------------------- > Visit this GEANT4 at hypernews.slac.stanford.edu message (to reply or unsubscribe) at: > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/space_app/98/2.html >
|Inline Depth:||Outline Depth:||Add message:|