|Message: Re: dose depth curve||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Thank you for your answer.
I had a look at the example you recommended but as I get it right, my Situation is a bit different. It is shown in the geometry file I attached in Case 3.
I'm shoot a fluence of particles ,I calculated with Spenvis, from the outside on the sphere.
And I want to get a curve like the one I calculated with Spenvis (Ionizing and non-ionizing dose models for simple geometries). I also attached the curve (sd2_dose).
I modeled the same geometry in Geant4 and shoot the same particles on it. But the result isn't the same. But I guess it should be.
Is there a way to create a model with G4 that delivers the same results as Spenvis?
Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2008/09/12/09.28-98770-geometry.gif http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2008/09/12/09.28-68716-sd2_dose.jpg
|Inline Depth:||Outline Depth:||Add message:|