|Message: Exporting the DICOM Module||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hello Medical Application Community,
Does anyone have any advice as to how to export the DICOM extended example geometry into another program, such as into the B1 example?
Is it sufficient to only import the DicomDetectorConstruction, DicomRegularDetectorConstruction, DicomPhantomParameterisationColour, DicomZSliceHeader, DicomZSliceMerged classes?
I tried and the phantomContainer imported but the parameterisation does not show in the visualization.
Thank you! -Katya
|Inline Depth:||Outline Depth:||Add message:|