|Message: Outputting Medical Linac via OpenScientist||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I'm using cygwin, Windows XP, Geant4.9.3, and OpenScientist 16.8. I've got A01.aida well when I ran the A01 examples. For medical_linac, I set "export G4ANALYSIS_USE=1" and did "make" well. I turned off the 'vis.mac' and tired to use OpenScientist. But no windows does show up when I run medical linac and it was just closed when I did "/run/beamOn 100". Of course, I didn't get any file like .aida, and .xml.
I've read #177. However, I don't have MedLinacAnanlysisManager.cc. It was not included in advanced exmples of medical linac. Is there something wrong with my examples?? or I should have made "MedLinacAnalysisManager.cc" by myself?
I appreciate your advices and time in advance. Wonmo.