Message: Re: How to get SOBP output with Hadrontherapy example Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

Question Re: How to get SOBP output with Hadrontherapy example 

Forum: Medical Applications
Re: Question How to get SOBP output with Hadrontherapy example (Jongseok)
Re: Feedback Re: How to get SOBP output with Hadrontherapy example (G.A.P.Cirrone)
Date: 04 Apr, 2010
From: Jongseok <Jongseok>

Thank for answering my question.

As you told me, I changed modulator angles (1degree)for each beam(1000), and I didn't change an output file name for summing all outputs.

However, I couldn't get enough SOBP.

In the following picture,

THE RED LINE:

no degree change of modulator /run/beamOn 4000

THE BLUE LINE:

/run/beamOn 1000 /modulator/angle 1 deg /run/beamOn 1000 /modulator/angle 1 deg /run/beamOn 1000 /modulator/angle 1 deg /run/beamOn 1000

THE GREEN LINE:

/run/beamOn 2000 /modulator/angle 1 deg /run/beamOn 2000

I modified running commands in proton_therapy.mac like previous explanation.

As you see attachment file, there is no SOBP.

Are there some mistakes in commands?

Or Should I change material for each elements?

   Attachment:
      http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2010/04/04/19.04-39276-output.JPG

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

1 Feedback: Re: How to get SOBP output with Hadrontherapy example   (G.A.P.Cirrone - 04 Apr, 2010)
(_ Question: Re: How to get SOBP output with Hadrontherapy example   (Jongseok - 04 Apr, 2010)
(_ Feedback: Re: How to get SOBP output with Hadrontherapy example   (G.A.P.Cirrone - 04 Apr, 2010)
(_ Ok: Re: How to get SOBP output with Hadrontherapy example   (Jongseok - 05 Apr, 2010)
 Add Message Add Message
to: "Re: How to get SOBP output with Hadrontherapy example"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]