Message: Re: Can't seem to produce AIDA files Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None Re: Can't seem to produce AIDA files 

Forum: Medical Applications
Re: Question Can't seem to produce AIDA files
Re: Feedback Re: Can't seem to produce AIDA files (Christina Zacharatou)
Date: 21 Oct, 2009
From: <paulmcg>

I've installed VMWare and added the files, now I can produce an AIDA file with the extended example A01 however the MedLinac example freezes after I enter /run/beamOn.

It runs as below and finishes with no output, just the message "killed"

Idle> /run/beamOn

G4VRangeToEnergyConverter::BuildLossTable() Create theLossTable[0xa29a6e0] NumberOfElements=19
G4VRangeToEnergyConverter::BuildLossTable() Create theLossTable[0xa2ef288] NumberOfElements=19
G4VRangeToEnergyConverter::BuildLossTable() Create theLossTable[0xa2ef2e8] NumberOfElements=19
G4VRangeToEnergyConverter::ConvertCutToKineticEnergy   for gamma
The cut in range [80 (mm)] is too big for material idx=5 The cut in energy is set1.79769e+305GeV G4VRangeToEnergyConverter::ConvertCutToKineticEnergy for gamma The cut in range [80 (mm)] is too big for material idx=5 The cut in energy is set1.79769e+305GeV
G4VUserPhysicsList::BuildPhysicsTable does not retrieve Cut Table but calculate
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for gamma
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for e-

msc:   for e-    SubType= 10
      Lambda tables from 100 eV  to 100 TeV in 84 bins, spline: 1
      RangeFactor= 0.02, step limit type: 1, lateralDisplacement: 1, skin= 3, geomFactor= 2.5
      ===== EM models for the G4Region  DefaultRegionForTheWorld ======
         UrbanMscUni :     Emin=          0 eV         Emax=   100 TeV
AugerTransitionTable complete
...

.... AugerTransitionTable complete

LowEnergyIoni:  Total cross sections from EEDL database.
      Gamma energy sampled from a parametrised formula.
      Implementation of the continuous dE/dx part.
      At present it can be used for electrons in the energy range [250eV,100GeV].
      The process must work with G4LowEnergyBremsstrahlung.

LowEnBrem:  Total cross sections from EEDL database.
      Gamma energy sampled from a parameterised formula.
      Implementation of the continuous dE/dx part.
      At present it can be used for electrons in the energy range [250eV,100GeV].
      The process must work with G4LowEnergyIonisation.
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for e+

eIoni:   for  e+    SubType= 2
      dE/dx and range tables from 100 eV  to 100 TeV in 84 bins
      Lambda tables from threshold to 100 TeV in 84 bins, spline: 1
      finalRange(mm)= 1, dRoverRange= 0.2, integral: 1, fluct: 1, linLossLimit= 0.01
      ===== EM models for the G4Region  DefaultRegionForTheWorld ======
        MollerBhabha :     Emin=          0 eV         Emax=   100 TeV

eBrem:   for  e+    SubType= 3
      dE/dx and range tables from 100 eV  to 100 TeV in 84 bins
      Lambda tables from threshold to 100 TeV in 84 bins, spline: 1
      LPM flag: 1 for E > 1 GeV
      ===== EM models for the G4Region  DefaultRegionForTheWorld ======
               eBrem :     Emin=          0 eV         Emax=   1 GeV
            eBremRel :     Emin=          1 GeV        Emax=   100 TeV

annihil:   for  e+    SubType= 5
      Lambda tables from 100 eV  to 100 TeV in 84 bins, spline: 1
      ===== EM models for the G4Region  DefaultRegionForTheWorld ======
            eplus2gg :     Emin=          0 eV         Emax=   100 TeV
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for proton
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for anti_kaon0
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for anti_neutron
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for anti_proton
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for geantino
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for kaon+
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for kaon-
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for kaon0
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for lambda
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for neutron
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for omega-
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for pi+
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for pi-
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for pi0
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for sigma+
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for sigma-
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for sigma0
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for xi-
G4VUserPhysicsList::BuildPhysicsTable  Calculate Physics Table for xi0

========= Table of registered couples ==============================

Index : 0     used in the geometry : Yes     recalculation needed : No
 Material : Air
 Range cuts        :  gamma 2.19529e-140 fm     e- 2.19529e-140 fm     e+ 2.19529e-140 fm
 Energy thresholds :  gamma 990 eV     e- 990 eV     e+ 990 eV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 1     used in the geometry : Yes     recalculation needed : No
 Material : interGalactic
 Range cuts        :  gamma 2.19529e-140 fm     e- 2.19529e-140 fm     e+ 2.19529e-140 fm
 Energy thresholds :  gamma 990 eV     e- 990 eV     e+ 990 eV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 2     used in the geometry : Yes     recalculation needed : No
 Material : Tungsten
 Range cuts        :  gamma 2.19529e-140 fm     e- 2.19529e-140 fm     e+ 2.19529e-140 fm
 Energy thresholds :  gamma 990 eV     e- 990 eV     e+ 990 eV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 3     used in the geometry : Yes     recalculation needed : No
 Material : Copper
 Range cuts        :  gamma 2.19529e-140 fm     e- 2.19529e-140 fm     e+ 2.19529e-140 fm
 Energy thresholds :  gamma 990 eV     e- 990 eV     e+ 990 eV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 4     used in the geometry : Yes     recalculation needed : No
 Material : Tungsten
 Range cuts        :  gamma 2.19529e-140 fm     e- 2.19529e-140 fm     e+ 2.19529e-140 fm
 Energy thresholds :  gamma 990 eV     e- 990 eV     e+ 990 eV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 5     used in the geometry : Yes     recalculation needed : No
 Material : Water
 Range cuts        :  gamma 2.19529e-140 fm     e- 2.19529e-140 fm     e+ 2.19529e-140 fm
 Energy thresholds :  gamma 990 eV     e- 990 eV     e+ 990 eV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 6     used in the geometry : Yes     recalculation needed : No
 Material : Beryllium
 Range cuts        :  gamma 2.19529e-140 fm     e- 2.19529e-140 fm     e+ 2.19529e-140 fm
 Energy thresholds :  gamma 990 eV     e- 990 eV     e+ 990 eV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 7     used in the geometry : Yes     recalculation needed : No
 Material : Kapton
 Range cuts        :  gamma 2.19529e-140 fm     e- 2.19529e-140 fm     e+ 2.19529e-140 fm
 Energy thresholds :  gamma 990 eV     e- 990 eV     e+ 990 eV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 8     used in the geometry : Yes     recalculation needed : No
 Material : Mylar
 Range cuts        :  gamma 2.19529e-140 fm     e- 2.19529e-140 fm     e+ 2.19529e-140 fm
 Energy thresholds :  gamma 990 eV     e- 990 eV     e+ 990 eV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 9     used in the geometry : Yes     recalculation needed : No
 Material : Tungsten
 Range cuts        :  gamma 2.19529e-140 fm     e- 2.19529e-140 fm     e+ 2.19529e-140 fm
 Energy thresholds :  gamma 990 eV     e- 990 eV     e+ 990 eV
 Region(s) which use this couple :
    DefaultRegionForTheWorld

Index : 10     used in the geometry : Yes     recalculation needed : No
 Material : Tungsten
 Range cuts        :  gamma 8 cm     e- 8 cm     e+ 8 cm
 Energy thresholds :  gamma 2.88022e+295 J      e- 716.547 MeV    e+ 682.117 MeV Region(s) which use this couple :
    PrimaryCollimatorLow

Index : 11     used in the geometry : Yes     recalculation needed : No
 Material : Tungsten
 Range cuts        :  gamma 8 cm     e- 8 cm     e+ 8 cm
 Energy thresholds :  gamma 2.88022e+295 J      e- 716.547 MeV    e+ 682.117 MeV Region(s) which use this couple :
    PrimaryCollimatorUp

====================================================================

Killed

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

1 None: Re: Can't seem to produce AIDA files   (Christina Zacharatou - 21 Oct, 2009)
 Add Message Add Message
to: "Re: Can't seem to produce AIDA files"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]