| Message: Re: FarOutsideCurrentVolume exceptions | Not Logged In (login) |
|
Maybe this is a geometry problem. I run /geometry/test/recursive_test and got outputs like the following:
DistanceToOut(p,v) = kInfinity for point inside
Solid name = WCBarrelAnnulus
Local position = -1708 1221.21 0 cm
GeomTest Error: SolidProblem
DistanceToOut(p,v) = kInfinity for point inside
Solid name = WCBarrelRing
Local position = -1708 1221.21 0 cm
This point is far outside of the WCBarrelAnnulus. The WCBarrelRing is the daugter volume of the annulus. It is used to divide it in Z direction. At the moment, there is only on WCBarrelRing that fills the howl WCBarrelAnnulus volume.
-----------------------------------------------------------
*** Dump for solid - WCBarrelRing ***
===================================================
Solid type: G4Polyhedra
Parameters:
starting phi angle : 18 degrees
ending phi angle : 378 degrees
number of Z planes: 2
Z values:
Z plane 0: -5997
Z plane 1: 5997
Tangent distances to inner surface (Rmin):
Z plane 0: 17580.4
Z plane 1: 17580.4
Tangent distances to outer surface (Rmax):
Z plane 0: 17959
Z plane 1: 17959
number of RZ points: 4
RZ values (corners):
17580.4, 5997
17580.4, -5997
17959, -5997
17959, 5997
-----------------------------------------------------------
|
| Inline Depth: | Outline Depth: | Add message: |
|
to: |