Message: defining of the sensitive detectors in SteppingAction Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None defining of the sensitive detectors in SteppingAction 

Forum: Biasing and Scoring
Date: 21 Feb, 2018
From: masume soleimaninia <masume soleimaninia>

Dear Experts, Hello

I want to simulate a microelectronic structure and to expose it with protons.It has a region called sensitive region which has two separate sections in my structure. one is a repeated squares filled with Si & SiO2 and bottom of them there is a layer composed of just Si,(both of parts are sensitive regions). there are a number of layers above the sensitive region and I just want to know the deposited energy in sensitive regions. I used example of B1 to make this structure. please tell me what should I put instead of Scoring Volume in Stepping Action? I attached a part of the program in the following which I commented the redundant layers in them. I mean it is just defined for sensitive region. I hope I could clarify the question.

Thanks in advance

   Attachment:
      http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2018/02/21/04.22-20075-B1DetectorConstruction.hh
      http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2018/02/21/04.22-79268-B1SteppingAction.hh
      http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2018/02/21/04.22-30732-B1DetectorConstruction.cc
      http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2018/02/21/04.22-2128-B1SteppingAction.cc

 Add Message Add Message
to: "defining of the sensitive detectors in SteppingAction"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews